Trui Kwaliteitscontrole Checklist voor B2B Kopers

A great sample means nothing if the bulk order arrives with twisted seams, pilling or off-spec measurements. Quality control is what turns a good factory sample into a reliable shipment, season after season. This checklist gives B2B buyers a practical framework for what to inspect, when to inspect it, and how to hold a knitwear factory to a consistent standard.

Quality is not inspected in at the end. It is built in at every stage, and verified at the end. A factory that only checks finished goods is already too late.

💬 Sourcing this for an upcoming project? Request a free quote → · MOQ 30 pcs · Sample in 15–25 days · WhatsApp us

Reliable knitwear QC happens at three points. Confirm your factory does all three, not only the final one.

• Even stitch density with no dropped or uneven stitches
• Clean, flat linking at shoulders, neck and side seams
• Secure, neatly finished collar, cuffs and hem
• No holes, snags, or loose yarn ends
• Buttons, zippers and trims attached securely

• Body length, chest, sleeve and shoulder within tolerance
• Consistent grading across the full size range
• Symmetry between left and right sides

• Pilling resistance tested on the actual yarn
• Shrinkage within spec after washing
• Color fastness to washing and rubbing
• Color consistency across the whole order (no shade variation)

• Pressed and shaped correctly, no creasing or twisting
• Clean surface, no stains, oil marks or dust
• Correct labels, hangtags and packaging

Agree measurement tolerances (for example +/- 1cm on body length) and an AQL (Acceptance Quality Limit) standard before bulk starts. AQL 2.5 is common for apparel. Putting these in writing turns "looks fine" into an objective pass/fail, and protects both sides.

The most frequent knitwear issues are pilling, twisting (spirality), shade variation between pieces, and measurement drift across a large order. A good factory knows its own top defects and how it prevents them. Ask directly. For more, see our guide to common sweater quality problems.

• Request the factory's QC process in writing before ordering
• Approve a PP (pre-production) sample as the quality benchmark
• Agree tolerances and AQL up front
• Consider a third-party inspection for large or first orders
• Keep the approved sample as the reference for any dispute

AQL is easier to trust once you see it on a real lot. Say you place a 600-piece order of merino crewnecks. Under a single normal-level inspection at AQL 2.5, the inspector pulls a random sample of 80 pieces from the packed cartons, not the best ones on top. Defects are sorted into three buckets, each with its own limit.

A critical defect is anything unsafe or unsellable — a broken needle fragment caught by metal detection, for example — and even one fails the lot. Majors are faults a customer would reject on the shelf: a hole, badly twisted seam, or an out-of-tolerance measurement. Minors are small cosmetic issues like a loose thread. Find 6 majors in the 80-piece sample and the lot is rejected; the factory reworks and you re-inspect before it ships. Agreeing this math in your PO removes the argument over whether a shipment is "good enough."

A checklist only works if the target is written down. Before a quote is even confirmed, lock these into a one-page tech pack so every inspection has an objective reference.

• Measurements with tolerances — every point of measure (body length, chest, sleeve, shoulder, cuff, hem) with a +/- range, not a single number
• Gauge and yarn — the agreed gauge (anywhere from 3GG chunky to 18GG fine) and exact fiber, whether cotton, wool, merino, cashmere, a blend, acrylic, or recycled yarn
• Approved color standard — a physical lab dip or Pantone reference for shade matching across the order
• Defect classification — your own list of what counts as critical, major and minor for this product
• Performance targets — pilling grade, shrinkage limit and colorfastness requirement
• Certification scope — confirm in writing which standards apply, such as OEKO-TEX Standard 100 for the yarn, GRS for recycled content, with ISO 9001 covering the factory's process

Keep the signed-off PP sample, the tech pack and the dye lot reference together. That trio is the reference for any dispute and the baseline for repeat seasons.

At what order size should I pay for a third-party inspection? For first orders with a new factory and for any large run, a third-party inspection is worth the cost regardless of size. On repeat orders from a proven factory, in-house multi-stage QC plus your own goods-in check is usually enough.

What is the difference between AQL 2.5 and a "zero-defect" order? AQL 2.5 accepts a small, defined number of minor and major faults in a random sample, which is the realistic apparel standard. True zero-defect inspection means checking every piece, which raises cost and lead time and is normally reserved for high-value or safety-critical goods.

Can quality control fit within standard sampling and production timelines? Yes. Multi-stage QC is built into our normal schedule — sampling stays at 15–25 days and bulk production at 30–45 days — because in-line checks prevent the rework that would otherwise blow the timeline.

Licheng Knitwear runs multi-stage QC with metal detection and AQL inspection before shipment for B2B buyers in North America and Europe. Request a quote or learn how we vet quality end to end.

---

If you're planning a real project around any of the points above, we'd be glad to take a quick look. Send a short brief and we'll come back within one business day with a practical direction, MOQ + lead time estimate, and a sample plan if it makes sense.

→ Request a free quote · Download the men's knitwear catalog · WhatsApp us · info@lcgarment.cn